How to install the AppImage?

    The AppImage is a stand-alone desktop app. Run the app by double-clicking or entering in a terminal:

    cd ~/Downloads # navigate to your download folder
    chmod +x ./BitBox-[version]-x86_64.AppImage # make executable
    ./BitBox-[version]-x86_64.AppImage # to run the app

    If the BitBox device is not detected by the app, you may need to manually adjust USB permissions. To do this for most recent distributions, enter the following line in a terminal (sudo access required), then replug the device:

    printf "SUBSYSTEM==\"usb\", TAG+=\"uaccess\", TAG+=\"udev-acl\", SYMLINK+=\"bitbox02_%%n\", ATTRS{idVendor}==\"03eb\", ATTRS{idProduct}==\"2403\"\n" | sudo tee /etc/udev/rules.d/53-hid-bitbox02.rules > /dev/null && printf "KERNEL==\"hidraw*\", SUBSYSTEM==\"hidraw\", ATTRS{idVendor}==\"03eb\", ATTRS{idProduct}==\"2403\", TAG+=\"uaccess\", TAG+=\"udev-acl\", SYMLINK+=\"bitbox02_%%n\"\n" | sudo tee /etc/udev/rules.d/54-hid-bitbox02.rules > /dev/null
    printf "SUBSYSTEM==\"usb\", TAG+=\"uaccess\", TAG+=\"udev-acl\", SYMLINK+=\"dbb%%n\", ATTRS{idVendor}==\"03eb\", ATTRS{idProduct}==\"2402\"\n" | sudo tee /etc/udev/rules.d/51-hid-digitalbitbox.rules > /dev/null && printf "KERNEL==\"hidraw*\", SUBSYSTEM==\"hidraw\", ATTRS{idVendor}==\"03eb\", ATTRS{idProduct}==\"2402\", TAG+=\"uaccess\", TAG+=\"udev-acl\", SYMLINK+=\"dbbf%%n\"\n" | sudo tee /etc/udev/rules.d/52-hid-digitalbitbox.rules > /dev/null

    Or, if the above does not work for your distribution, add yourself to the 'plugdev' group (if not already a member; a reboot may be required for some distributions) and enter the following line in a terminal (sudo access required):

    printf "SUBSYSTEM==\"usb\", SYMLINK+=\"bitbox02_%%n\", GROUP=\"plugdev\", MODE=\"0664\", ATTRS{idVendor}==\"03eb\", ATTRS{idProduct}==\"2403\"\n" | sudo tee /etc/udev/rules.d/53-hid-bitbox02.rules > /dev/null && printf "KERNEL==\"hidraw*\", SUBSYSTEM==\"hidraw\", SYMLINK+=\"bitbox02_%%n\", GROUP=\"plugdev\", MODE=\"0664\", ATTRS{idVendor}==\"03eb\", ATTRS{idProduct}==\"2403\"\n" | sudo tee /etc/udev/rules.d/54-hid-bitbox02.rules > /dev/null
    printf "SUBSYSTEM==\"usb\", SYMLINK+=\"dbb%%n\", GROUP=\"plugdev\", MODE=\"0664\", ATTRS{idVendor}==\"03eb\", ATTRS{idProduct}==\"2402\"\n" | sudo tee /etc/udev/rules.d/51-hid-digitalbitbox.rules > /dev/null && printf "KERNEL==\"hidraw*\", SUBSYSTEM==\"hidraw\", SYMLINK+=\"dbbf%%n\", GROUP=\"plugdev\", MODE=\"0664\", ATTRS{idVendor}==\"03eb\", ATTRS{idProduct}==\"2402\"\n" | sudo tee /etc/udev/rules.d/52-hid-digitalbitbox.rules > /dev/null

    Afterwards run the following command and then replug your BitBox02
    sudo udevadm control --reload 
    sudo udevadm trigger

    If the sha256sum checksum does not match, your browser may have requested a second level of gz compression. In this case, a clean download can be made with curl, for example:

    If you are using Tor, the proxy information is required:
    curl -O --socks5 [url]
    Published